AGCO Gleaner S97 - Clover; Rye

Clover
Initial Combine Setup
Rotor
RPM
Concave Setting
Fan Opening
Chaffer Opening
Sieve Opening
Chopper Speed
Elevato
r
Boots
400 -600 0.0” -0.3” 2 - 6 **
0.25”-
0.925”
(6 mm-
16mm)
0.1”
(2.5 mm)
Fast* Solid
* - If baling straw is preferred, order impeller if needed.
** - The Light Seed Kit #700959206 can be installed and used for clover seed
harvest but should be removed for any other crop.
Initial Header & Header Drive Setup
• Variable speed header drive in slowest position.
• Right hand pivot drive belt positioned on large countershaft d
rive
sheave.
Additional Combine Setup
• May require additional Separator Blanking Kit #700961967. This will
block off separator grates and level out shoe distribution. Please have
your dealer contact Technical Service Support.
Rye
Initial Combine Setup
Rotor
RPM
Concave Setting
Fan Opening
Chaffer Opening
Sieve Opening
Chopper Speed
Elevato
r
Boots
750 0.2” 5 - 7
0.75”
(19 mm)
0.312”
(8 mm)
Fast Solid
Initial Header & Header Drive Setup
• Variable speed header drive in slowest position.
• Right hand pivot drive belt positioned on large countershaft d
rive
sheave.
11