AGFA Drystar 5300 - About Drystar 5300 Consumables

35
2921B EN 20031206
About Drystar 5300 consumables
The Drystar 5300 can handle blue-transparent and clear-transparent films.
Available film formats are 11x14” and 14x17”.
When a new film pack is loaded, the Film Identification tag is read and the
printer settings are automatically adjusted.
The key-operator can overrule the film settings for the input tray. Refer to
‘Changing the configuration settings’ on page 58 of the Drystar 5300
Reference manual.
The following film types can be used:
" If you want to change the film format, the tray configuration must be
modified. Refer to ‘Changing the film format of the trays’ on page 152 of
the Drystar 5300 Reference manual for more information.
Film type Film format
Drystar DT2 B 11x14” or 14x17”
Drystar DT2 C 11x14” or 14x17”