59
2921B EN 20031206
Cleaning the exterior
1 Switch off the Drystar 5300 by following the procedure as described in
‘Switching off the Drystar 5300’ on page 30.
2 Remove the power plug from the socket.
3 Wipe the exterior of the printer with a clean, soft, damp cloth.
Use a mild soap or detergent if required but never use an ammonia–based cleaner.
Be careful not to get any liquid in the power cord port.
4 Plug in the printer and switch it on by following the procedure as described in
‘Switching on the Drystar 5300’ on page 28.
To Next Page
Loading...
