70
2921B EN 20031206
Connectivity with Agfa equipment
•
Paxport
• MG3000
• ADC 70
• ADC Compact
• ADC Compact Plus
• ADC Solo
• Impax
• DR-Thorax
Connectivity with non-Agfa equipment
From a connectivity point of view, every connection to a modality supporting
"DICOM print" is released per default (Generic Release). At market launch,
the most important modalities (depending on the printers main market, e.g.
CR/DR) of the OEM's will have been covered. In a later stage, more
connectivity testing will take place depending on the specified requests. The
most actual listing of verified modalities can be found in the Interface Status
Report.
To Next Page
