AGFA Drystar 5300 - Page 73

73
2921B EN 20031206
Drystar 5300 Imager Daily Density
Control Chart
Imager Type: __________
Serial #: _____________ Film Type:____________ Emul #:___________
Densitometer (Internal or External ) If External: Type _______________ Serial #:________________
Date:
Initia ls:
Mid Density (Density closest to 1.20)
Density Difference
Upper Control limit =
+0.20
Mid Density Aim
Lower Control Limit =
-0.20
Upper Control limit =
+0.20
Density Difference
Aip
(High - Low)
Lower Control Limit =
-0.20
Chart 2A