Radiographic Working Modes
You can select following radiographic working modes according to the
parameters to be controlled and the degree of automation:
• One Point Mode (1P), by selecting kVp with AEC operations.
• Two Point Mode (2P), by selecting kVp and mAs.
• Three Point Mode (3P), by selecting kV, mA and exposure time
independently.
Topics:
• One Point Mode (1P)
• Two Point Mode (2P)
• Three Point Mode (3P)
40 | DX-D Software Console | Operating the DX-D Software Console
0189D EN 20180329 1421
To Next Page
Loading...
