AGFA DX-D - Filter Status

Filter Status
On systems with automatic filtering, the filter is automatically set, based on
the selected exposure.
The filter setting can be modified on the software console or on the collimator.
• on the software console, click the filter status drop-down arrow and select
the filter from the list.
• on the collimator, use the filter button
Table 3: Collimator with automatic filter
(no icon)
No filter is used.
A filter is used. Material and thickness of the filter are
specified.
Table 4: Collimator with manual filter
(no icon)
No filter is required.
A filter is required. Insert the filter manually.
DX-D Software Console | Operating the DX-D Software Console | 25
0189D EN 20180329 1421