EasyManua.ls Logo

AGFEO ST 42 - Function Buttons Overview; Do Not Disturb (DND)

AGFEO ST 42
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
System Telephone ST 42
8
Function Buttons - Freely programmable
Function Buttons (overview)
TAM activation To switch TAM module on or off.
TAM info To listen to messages recorded on the TAM.
TAM Memo To record messages on the TAM
Reject Reject the ringing call. Caller will hear busy tone.
Call Waiting Enabled / off You can select if:
If the caller will get busy tone if on a call. (off)
If a waiting call should only be visually indicated on your phone.
Or if a call waiting tone should be signalled. (audible)
Call Deflection To divert an incoming call during the ringing phase. There will be no change to the ringing tone when
diverted. The caller will not be aware that the call was forwarded.
Call Filter To switch Call Filters on or off.
Call Log Will list the Call Log.
Cleaning In connection with the check in / check out button. This can be used to signal to the front desk that a
room has been cleaned and is ready for occupation.
Do not Disturb (DND) This will disable the Tone Ringer
Special function buttons may be set:
DND for internal calls
DND for external calls
DND for internal- and external calls.
Night Service (AVA 2) Night Service on or off.
Special function buttons may be set:
Night Service can be switched for each trunk line.
Night Service can be switched for all trunk lines.
Call Forwarding Enable / Disable Call Forward if designated extension does not answer on incoming call.
Special function buttons may be allocated:
Switch Call Forward for each trunk line.
Switch Call Forward for all trunk lines.
Tannoy Announcement via Public Address Amplifier connected to the Telephone System.
Busy on Busy Return Busy Tone to Caller if one Extension is Busy within Call Distribution Group.
Special Buttons can be assigned
-Busy on Busy for each Call Distribution Group swithcable seperately
-Busy on Busy for call Call Distribution Group switchable together
Call by Call To select Network Provider via LCR
Check In/ Check Out Check in / Check out for Hotel applications. Will start and stop call logging and switch on or off trunk
line access.
Page (Tannoy) Pageing Announcement to System Phones. Programmable function Button - Page
specific Extensions.
Units Display Call Cost
Call Capture Malicious Call Identification via ISDN-Exchange
Remote functions Sending of stored DTMF Tones (1..0 * #) for a remote interogation of a Telephone Answering Machine
(TAM)
Remote Answer Possible to make the ringing extension go off hook from another phone.
Group Button Log in and out of Groups and their features
Headset To use a Headset (only Digital System Phones)
Mute Button To mute microphone on your telephone.

Related product manuals