Agilent Technologies 53220A - Carrier Frequency

53220A/53230A User’s Guide 113
53220A/53230A Measurements 3
Figure 3-13. 53230A Microwave Pulse Measurements.
Carrier Frequency
The commands used to measure the carrier frequency of a burst pulse are:
MEASure:FREQuency:BURSt? [<channel>]
CONFigure:FREQuency:BURSt [<channel>]
- channel is optional channel 3 specified as (@3).
+ width burst (on)
- width burst (off)
p-p
a
mplitude
-6 dB
PRI / PRF
burst carrier frequency