53220A/53230A User’s Guide 57
53220A/53230A Software Installation and Interface Configuration 2
SCPI Language Emulation Mode
If the 53220A/53230A is sometimes used in 53132A SCPI language (emulation)
mode, the instrument must be returned to its original (53220A/53230A) mode
before the firmware can be updated.
Downloading and Installing the Update Utility
53220A/53230A firmware updates are installed in the instrument using the
Agilent update utility. The utility and firmware update can be found at:
www.agilent.com/find/53220A
www.agilent.com/find/53230A
Once this page is displayed, select the ‘Technical Support’ tab and then select
‘Drivers and Software’. Click on ‘532x0A Firmware Update’ and under ‘Docu-
ments & Downloads’ select the utility:
53210A/53220A/53230A Firmware Update Utility
When prompted, select ‘Run’ to install the utility. The default installation
directory is C:\Program Files\Agilent\Firmware Update Utility Type 2. The
utility will also be added to the ‘start’ menu under “Agilent”.
To Next Page
Loading...
