Agilent Technologies 53220A - Pulse Width

53220A/53230A User’s Guide 97
53220A/53230A Measurements 3
Pulse Width
An example of positive and negative pulse widths are shown in Figure 3-9.
Figure 3-9. Positive and Negative Pulse Width Measurements.
The commands used to make positive and negative pulse width measurements
are:
MEASure:PWIDth? [{<reference>|MINimum|MAXimum|DEFault}]
[,<channel>]
CONFigure:PWIDth [{<reference>|MINimum|MAXimum|DEFault}]
[,<channel>]
+ width
-width
frequency
t
r
t
f
10
90