16 53220A/53230A User’s Guide
1 Preparation for Use
1 Power cord
2 USB cable
3 Agilent I/O Libraries Suite CD-ROM
4 Agilent 53210A/53220A/53230A Product Reference CD-ROM
Additionally, your instrument may have shipped with one or more of the
following options installed.
Table 1-1. 53220A/53230A Product Options.
No Manuals?
There are three printed manuals available with the 53220A/53230A:
• Agilent 53220A/53230A Quick Start Tutorial (p/n 53220-90005)
• Agilent 53220A/53230A User’s Guide (p/n 53220-90001)
• Agilent 53210A/53220A/53230A Service Guide (p/n 53220-90010)
53220A
Opt. 010: Ultra High-Stability OCXO Timebase
Opt. 106: 6 GHz Microwave Input (Ch. 3)
Opt. 115: 15 GHz Microwave Input (Ch. 3)
Opt. 201: Add parallel Channel 1 and Channel 2 inputs on rear panel
Opt. 202: Install Option 106/115 on front panel
Opt. 203: Install Option 106/115 on rear panel
Opt. 300: Internal Lithium Ion Smart Battery and Charger
Opt. 400: GPIB Interface
53230A
Opt. 010: Ultra High-Stability OCXO Timebase
Opt. 106: 6 GHz Microwave Input (Ch. 3)
Opt. 115: 15 GHz Microwave Input (Ch. 3)
Opt. 150: Pulse Microwave Measurements (53230A only)
Opt. 201: Add parallel Channel 1 and Channel 2 inputs on rear panel
Opt. 202: Install Option 106/115 on front panel
Opt. 203: Install Option 106/115 on rear panel
Opt. 300: Internal Lithium Ion Smart Battery and Charger
Opt. 400: GPIB Interface
NOTE
Each of the product options listed in Table 1-1 is available after the original purchase of the
instrument. Refer to the 53210A/53220A/53230A Service Guide (p/n 53220-90010) for
installation instructions for each of these options.
To Next Page
Loading...
