234 53220A/53230A User’s Guide
6 53220A/53230A Math, Graphing, and Data Logging
The maximum delay setting is 99:00:00.
Starting the Data Logger
Pressing the Run softkey enables data logging. Data logging begins following
any specified start delay when a valid path/file exists. A default path and file
name of:
Internal\DataLog
is used when the data logger application is started. Select Yes to overwrite the
file and begin.
Viewing Readings
A trend chart is populated as readings are logged. After data logging com-
pletes, the readings are stored in the file specified. Pressing View Results when
logging is stopped and the readings are saved, or when logging is complete,
displays a trend chart of the saved readings.
To Next Page
Loading...
