53220A/53230A User’s Guide 253
Formats and Data Flow 7
Creating State Files
Instrument states can be stored in the instrument’s internal flash memory or
on a USB memory device and recalled later to restore a specific configuration
(Figure 7-2).
The commands used to store and load counter states are:
MMEMory:STORe:STATe <“file”>
MMEMory:LOAD:STATe <“file”>
<file> is created during execution of the STORe command. The parameter
format is “[drive:path]<file_name>”. drive is either INT (internal flash
To Next Page
Loading...
