Name: Agilent Technologies 6495B
Brand: Agilent Technologies
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Agilent 6400 Series Triple Quadrupole LC/MS System

Installation Guide

Software Installation and Configuration

Step 1. Set up the computer system 36

Step 2. Check PC network card configuration 37

Step 3. Prepare for installation 38

Step 4. Install the Data Acquisition program 39

Step 5. Install the Qualitative Analysis program 40

Step 6. Install the Quantitative Analysis program 41

Step 7. Install Microsoft Excel (optional) 41

Step 8. Install Service Packs for Data Acquisition 41

Step 9. Install Quantitative Analysis Reporting 42

Step 10. Configure Excel for MassHunter (optional) 42

Step 11. Configure the instrument 42

Step 12. Copy the support folder to the computer 44

Step 13. Confirm the LC firmware revision 46

Step 14. Finish the installation 47

If you purchased a bundled Triple Quadrupole LC/MS system, the MassHunter

Workstation software has been installed for you. In this case, start at “Step 4.

Install the Data Acquisition program”.

If you are upgrading MassHunter software that is already installed, refer to

the Upgrade Guide that came with your system.

Questions and Answers:

Need help?

Do you have a question about the Agilent Technologies 6495B and is the answer not in the manual?

Agilent Technologies 6495B Specifications

General