Name: Agilent Technologies 6495B
Brand: Agilent Technologies
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Agilent 6400 Series Triple Quad LC/MS System Installation Guide 5

Content

1 Instrument Installation 7

Step 1. Unpack and set up the Triple Quadrupole LC/MS 9

Step 2. Prepare to install the system 10

Step 3. Set up the Agilent MS40+ pumps 14

Step 4. Connect the Triple Quadrupole LC/MS 18

Step 5. Install the spray chamber 27

Step 6. Install the Agilent LC system 34

2 Software Installation and Configuration 35

Step 1. Set up the computer system 36

Step 2. Check PC network card configuration 37

Step 3. Prepare for installation 38

Step 4. Install the Data Acquisition program 39

Step 5. Install the Qualitative Analysis program 40

Step 6. Install the Quantitative Analysis program 41

Step 7. Install Microsoft Excel (optional) 41

Step 8. Install Service Packs for Data Acquisition 41

Step 9. Install Quantitative Analysis Reporting 42

Step 10. Configure Excel for MassHunter (optional) 42

Step 11. Configure the instrument 42

Step 12. Copy the support folder to the computer 44

Step 13. Confirm the LC firmware revision 46

Step 14. Finish the installation 47

3 Installation Completion and System Verification 49

Step 1. Condition the Agilent LC instrument 50

Step 2. Reset the collision cell gas flow rate 54

Step 3. Prepare the performance evaluation samples 58

Step 4. Set up methods and worklists 60

Step 5. Verify the Triple Quadrupole LC/MS sensitivity 63

Questions and Answers:

Need help?

Do you have a question about the Agilent Technologies 6495B and is the answer not in the manual?

Agilent Technologies 6495B Specifications

General