Introduction to Programming - 6
67
SCPI Conformance Information
SCPI Conformed Commands
The Agilent 66321B/D and 66319B/D conform to SCPI Version 1995.0.
ABOR OUTP:PROT:DEL STAT:QUES:ENAB
CAL:DATA OUT:PROT:STAT STAT:QUES:NTR
CAL:STAT [SOUR]:CURR[:LEV][:IMM][:AMPL] STAT:QUES:PTR
DISP[:WIND][:STAT] [SOUR]:CURR[:LEV]:TRIG[:AMPL] SYST:ERR?
DISP[:WIND]:TEXT[:DATA] [SOUR]:CURR:PROT:STAT SYST:LANG
INIT[:IMM]:SEQ | NAME [SOUR]:VOLT[:LEV][:IMM][:AMPL] SYST:VERS?
INIT:CONT:SEQ | NAME [SOUR]:VOLT[:LEV]:TRIG[:AMPL] TRIG[:SEQ1 | :TRAN][:IMM]
MEAS | FETC:ARR:CURR[:DC]? [SOUR]:VOLT:PROT TRIG[:SEQ1 | :TRAN]:SOUR
MEAS | FETC:ARR:VOLT[:DC]? SENS:CURR[:DC]:RANG[:UPP] TRIG:SEQ2 | ACQ[:IMM]
MEAS | FETC[:SCAL]:CURR[:DC]? SENS:FUNC TRIG:SEQ2 | ACQ:SOUR
MEAS | FETC[:SCAL]:CURR:HIGH? SENS:SWE:OFFS:POIN TRIG:SEQ:DEF
MEAS | FETC[:SCAL]:CURR:LOW? SENS:SWE:POIN *CLS
MEAS | FETC[:SCAL]:CURR:MAX? SENS:SWE:TINT *ESE*ESE?*ESR?
MEAS | FETC[:SCAL]:CURR:MIN? STAT:OPER[:EVEN]? *IDN?
MEAS | FETC[:SCAL]:VOLT[:DC]? STAT:OPER:COND? *OPC*OPC?*OPT?
MEAS | FETC[:SCAL]:VOLT:HIGH? STAT:OPER:ENAB *PSC*PSC?
MEAS | FETC[:SCAL]:VOLT:LOW? STAT:OPER:NTR *RCL*RST
MEAS | FETC[:SCAL]:VOLT:MAX? STAT:OPER:PTR *SAV*SRE*STB?
MEAS | FETC[:SCAL]:VOLT:MIN? STAT:PRES *TRG*TST?
OUTP[:STAT] STAT:QUES[:EVEN]? *WAI
OUTP:PROT:CLE STAT:QUES:COND?
Non-SCPI Commands
CAL:CURR[:SOUR][:DC][:POS] OUTP:DFI:SOUR
CAL:CURR[:SOUR][:DC]:NEG OUTP:PON:STAT
CAL:MEAS[:DC]:LOWR OUTP:RI:MODE
CAL:MEAS:AC OUTP:TYPE
CAL:LEV SENS:CURR:DET
CAL:PASS SENS:LEAD:STAT?
CAL:SAVE [SOUR]:DIG:DATA[:VAL]
CAL:VOLT[:DC] [SOUR]:DIG:FUNC
CAL:VOLT:PROT [SOUR]:RES[:LEV][:IMM][:AMPL]
DISP[:WIND]:MODE TRIG:SEQ2 | ACQ:COUN:CURR | :VOLT
MEAS | FETC[:SCAL]:CURR:ACDC? TRIG:SEQ2 | ACQ:HYST:CURR | :VOLT
MEAS | FETC[:SCAL]:VOLT:ACDC? TRIG:SEQ2 | ACQ:LEV:CURR | :VOLT
OUTP:DFI[:STAT] TRIG:SEQ2 | ACQ:SLOP:CURR | :VOLT
To Next Page
Loading...
Need help?
General
