Agilent Technologies 7820A GC User Manual

7820A GC Installation Guide
7820A GC Installation Manual 33
Sampler connectors
If using an ALS, connect to the GC using the following
connectors:
ALS PORT Tray
The sampler tray, if equipped.
ALS PORT Front
An injector, typically mounted over the front inlet.
ALS PORT Back
An injector, typically mounted over the back inlet.
Signal connector
The two analog output signal.
REMOTE connector
Provides a port to remotely start and stop other
instruments. A maximum of 10 instruments can be
synchronized using this connector. See “Using the Remote
Start/Stop cable" on page 34 for more detail.
TEST PORT connector
This connector is reserved for future development.
LAN connector
Standard Local Area Network connector, for
communication with data systems and other devices.

Agilent Technologies 7820A GC Specifications

General

Brand	Agilent Technologies
Model	7820A GC
Category	Watch
Language	English