Agilent Technologies 8166B Programming Guide

Specific Commands Specific Command Summary
48 Agilent 8163A/B, 8164A/B & 8166A/B Mainframes, Fifth Edition
:SENSe[n][:CHANnel[m]]:POWer:Reference
:DISPlay Sets the reference level for a sensor from the input power level. page 106
:STATe/? Sets or returns whether sensor results are in relative or absolute
units.
page 106
:STATe:RATio/? Sets or returns whether sensor results are displayed relative to a
channel or to an absolute reference.
page 106
:SENSe[n][:CHANnel[m]]:RETurnloss:CALibration
:FACTory Sets the calibration value to factory settings. page 109
:COLLect:REFLectance Sets the reference reflectance calibration values to the values
currently measured by the chosen return loss module. (When, for
example, a gold reflector is used.)
page 109
:COLLect:TERMination Sets the termination calibration values to the values currently
measured by the chosen return loss module.
page 110
:COLLect:VALues? Returns current calibration values. page 110
:TERMination? Returns T-Value page 110
:SENSe[n][:CHANnel[m]]:RETurnloss:CORRection
:FPDelta[l]/? Sets or returns front panel delta, that is, the loss correction value
due, for example, to the front panel connector.
page 111
:REFLectance[l]/? Sets or returns the return loss reference, the return loss value of
your reference reflector.
page 112
:SLOT[n]
:EMPTy? Returns whether the module slot is empty. page 81
:IDN? Returns information about the module. page 81
:OPTions? Returns the module’s options. page 81
:TST? Returns the latest selftest results for a module. page 82
:SLOT[n][:HEAD[m]]
:EMPTy? Returns whether an optical head is connected. page 82
:IDN? Returns information about the optical head. page 82
:OPTions? Returns the optical head’s options. page 83
:TST? Returns the latest selftest results for an optical head. page 83
:WAVelength:RESPonse? Returns the wavelength response from the module with wave-
length calibration.
page 83
:WAVelength:RESPonse:CSV? Returns the wavelength response from the module with wave-
length calibration.
page 84
Table 4 Specific Command Summary (continued)
Command Description Page

Agilent Technologies 8166B Specifications

General

Brand	Agilent Technologies
Model	8166B
Category	Measuring Instruments
Language	English