Agilent Technologies 8166B Programming Guide

Specific Command Summary Specific Commands
Agilent 8163A/B, 8164A/B & 8166A/B Mainframes, Fifth Edition 49
:WAVelength:RESPonse:SIZE? Returns the no. of elements in the wavelength response table. page 84
[:SOURce[n]][:CHANnel[m]]
:MODout/? Returns the mode of the modulation output mode of the BNC
connector on the front panel of Agilent 81640A/80A/82A Tun-
able Laser modules.
page 121
[:SOURce[n]][:CHANnel[m]]:AM
[:INTernal]:FREQuency[l]/? Sets or returns the frequency of an internal signal source. page 115
:SOURce[l]/? Sets or returns a source for the modulating system. page 116
:STATe[l]/? Turns Amplitude Modulation of a source on or off or queries
whether Amplitude Modulation is on or off.
page 117
:COHCtrl:COHLevel[l]/? Sets or returns the coherence level. page 118
[:SOURce[n]][:CHANnel[m]]:FM
:SOURce[l]/? Sets or returns the type of frequency modulaion employed, spe-
cifically Simulated Brillouin Scattering (SBS) control.
page 118
:STATe[l]/? Turns Frequency Modulation of a source on or off or queries
whether Frequency Modulation is on or off.
page 119
:SBSCtrl:FREQuency[l]/? Sets or returns the frequency of SBS Control modulation. page 120
:SBSCtrl:LEVel[l]/? Sets or returns the level of SBS Control modulation
(as a percentage of maximum)
page 120
[:SOURce[n]][:CHANnel[m]:]POWer
[
:LEVel][:IMMediate][:AMPLitude[l]] Sets the laser output power of a source. page 124
[
:LEVel][:IMMediate][:AMPLitude[l]]? Returns the laser output power of a source. page 125
[:LEVel]:RISetime[l]/? Sets or returns the laser rise time of a source. page 126
:ATTenuation[l]/? Sets or returns the attenuation level for a source. page 122
:STATe/? Sets or returns the state of the source output signal. page 127
:UNIT/? Sets or returns the power units. page 127
:WAVelength/? Sets or returns the wavelength source of a dual-wavelength
source.
page 128
[:SOURce[n]][:CHANnel[m]:]POWer:ATTenuation[l]
:AUTO/? Selects Automatic or Manual Attenuation Mode for a source or
returns the selected mode.
page 123
:DARK/? Enables/disables ‘dark’ position on a source or returns whether
‘dark’ position is active for a source.
page 123
Table 4 Specific Command Summary (continued)
Command Description Page

Agilent Technologies 8166B Specifications

General

Brand	Agilent Technologies
Model	8166B
Category	Measuring Instruments
Language	English