11
Network analyzer upgrade kits
Options may be added to an Agilent 8720E series net-
work analyzer after initial purchase by ordering the
instrument’s model number followed by a “U” to indi-
cate an upgrade, and specifying one or more of the
following upgrade options. Some options are available
only for certain models, as noted in the description.
Refer to the option compatibility matrix on page 3
to determine if a desired option is compatible with
existing options in an ES-model network analyzer.
004 adds 55-dB step attenuator to an ET model ana-
lyzer for extended output power range. Includes
installation at an Agilent service center.
007 adds mechanical S-parameter transfer switch
to an ES model analyzer, replacing the standard
solid-state switch. Includes installation at an
Agilent service center.
010 adds time domain capability. Includes installation
at an Agilent service center.
012 modifies S-parameter test set in an ES model
analyzer for direct sampler access. Front panel
jumpers also allow standard instrument opera-
tion. Includes installation at an Agilent service
center.
020 for 8719ET or 8719ES only. Adds 20 GHz opera-
tion. Includes installation at an Agilent service
center.
040 for 8719ET/ES and 8720ET/ES only. Adds
40 GHz operation. Includes installation at the
Agilent factory.
085 modifies S-parameter test set in an ES model
analyzer for high power measurement capability
and provides direct sampler access. Includes
installation at the Agilent factory.
089 modifies S-parameter test set and firmware
in an ES model analyzer for frequency offset
mixer test capability. Includes installation at
an Agilent service center.
1D5 adds high stability frequency reference. Includes
installation at an Agilent service center.
400 adds fourth sampler and TRL calibration
firmware to an ES model analyzer. Includes
installation at the Agilent factory.
Agilent 8719D, 8720D, and 8722D analyzers can
be upgraded to have their firmware include the new
features introduced in the ES models with one of
the following upgrades.
8719DU, 8720DU, or 8722DU upgrade kit
Option 000 performance upgrade kit for an 8719D,
8720D, or 8722D with firmware revision below 7.0.
Adds new CPU board and firmware, which offers
measurement and data- transfer speed improve-
ments and the latest firmware. Includes installa-
tion at an Agilent service center.
Option 099 firmware upgrade for an 8719D, 8720D,
or 8722D with firmware revision above 7.0.
This firmware upgrade can be installed by the user.
The firmware is also available for download from
Agilent’s website. Go to www.agilent.com/find/8720
Upgrades
To Next Page
Loading...
Need help?
General
