Agilent Technologies 8753ES

5-17
Supplement for the Reference Guide (Firmware Revision 7.68)
Hardkey/Softkey Reference
Hardkey/Softkey Reference
Changes to Existing Softkeys
The description of these softkeys changed for the reference guides printed prior to
February 2001.
selects the 85033D or the 85033E cal kit.
indicates the currently selected cal kit and leads to the
select cal kit menu, which is used to select one of the
default calibration kits available for different connector
types. This, in turn, leads to additional menus used to
define calibration standards other than those in the
default kits (refer to “Modifying Calibration Kits” in the
“Operating Concepts” chapter of the user’s guide). When a
calibration kit has been specified, its connector type is
displayed in brackets in the softkey label. The cal kits
available are listed below, refer to the softkey descriptions
for these softkeys for more information.
—
—
—
—
—
—
—
—
—
—
—
selects the 85032B/E cal kit.
selects the 85032F cal kit.
3.5mmD 85033D/E
CAL KIT [ ]
2.4mm 85056
2.92* 85056K
2.92mm other kits
3.5mmC 85033C
3.5mmD 85033D/E
7-16 85038
7mm 85031
N 50
Ω
85032B/E
N 50
Ω
85032F
N 75
Ω
85036
TRL 3.5mm 85052C
N 50
Ω
85032B/E
N 50
Ω
85032F