72
Remote Interface Reference
• SCPI Command Summary, page 73
• Simplified Programming Overview, page 78
• Using the APPLy Command, page 81
• Output Setting and Operation Commands, page 82
• Triggering Commands, page 89
• System-Related Commands, page 92
• Calibration Commands, page 96
• RS-232 Interface Commands, page 99
• The SCPI Status Registers, page 100
• Status Reporting Commands, page 108
• An Introduction to the SCPI Language, page 111
• Halting an Output in Progress, page 116
• SCPI Conformance Information, page 117
• IEEE-488 Conformance Information, page 120
If you are a first-time user of the SCPI language, you may want to refer to
these sections to become familiar with the language before attempting to
program the power supply.
SCPI
SCPI
SCPI
To Next Page
