4 Installation Note E8362-90004
About the Upgrade Kit
If you need assistance, refer to “Getting Assistance from Agilent” on page 3.
Description of the Upgrade
This upgrade kit is used to extend the frequency range of the:
• E8362B/C PNA microwave network analyzer from 20 GHz to 40 GHz
Products affected. . . . . . . . . . . . . . . . . . . . . . . . . . E8362B/C without Option 014,
Configurable Test Set
Installation to be performed by . . . . . . . . . . . . . . Agilent service center or personnel
qualified by Agilent
Estimated installation time . . . . . . . . . . . . . . . . . 2.5 hours
Estimated adjustment time . . . . . . . . . . . . . . . . . 0.5 hours
Estimated full instrument calibration time . . . . 4.5 hours
To Next Page
Loading...
Need help?
General
