Agilent Technologies N9310A

N9310A RF Signal generator
Quick Start Guide 21
:PULM:WIDTh <val> <unit>
:PULM:WIDTh?
Set pulse width
I/Q modulation
SCPIcommand
:IQ:STATe ON|OFF|1|0
:IQ:STATe?
Turn On/Off I/Q
modulation
LF Out SCPI
command
:LFOutput:STATe ON|OFF|1|0
:LFOutput:STATe?
Turn on/off LF output
:LFOutput:FREQuency <val> <unit>
:LFOutput:FREQuency?
Set LF frequency
:LFOutput:AMPLitude <val> <unit>
:LFOutput:AMPLitude?
Set LF amplitude
System SCPI
command
:SYSTem:DISPlay WHITE|BLUE|GREEN
:SYSTem:DISPlay?
Set display style
:SYSTem:SSAVer ON|OFF|1|0
:SYSTem:SSAVer?
Set screen saver
:SYSTem:ERRor? View error messages
:SYSTem:DATE <year><month><day>
:SYSTem:DATE?
Set system date
:SYSTem:TIME <hour><minute>
:SYSTem:TIME?
Set system time
:SYSTem:REFerence:FREQuency
INT10MHz|EXT2MHz|EXT5MHz|EXT10MHz
:SYSTem:REFerence:FREQuency?
Set external reference
source
:SYSTem:PNMD NORMal|RESFM
:SYSTem:PNMD?
Set phase noise mode
Modulation
SCPI command
:MOD:STATe ON|OFF|1|0
:MOD:STATe?
Turn on/off modulation
RF OUT SCPI
command
:RFOutput:STATe ON|OFF|1|0
:RFOutput:STATe?
Turn on/off RF output
SCPI Command Utility