N9310A RF Signal generator
Quick Start Guide 13
Generating a Modulated Signal
To simplify the example, assume you wish to generate an
amplitude modulated (AM) signal with a:
• Carrier frequency of 900 MHz
• Carrier power level of –20.0 dBm
• AM depth of 60%
Setting up carrier frequency and amplitude
Setting up Amplitude Modulation
Operation Notes
1. Press hardkey.
Sets the signal generator to its
factory-defined instrument state.
2. Press >
900 > MHz
Sets the carrier frequency to 900 MHz for
amplitude modulation.
3. Press
>–20 > dBm
Sets the carrier amplitude to –20 dBm for
amplitude modulation.
Operation Notes
1. Press
hardkey.
Displays the
AM first level menu.
2. Press
AM Depth > 60 > % Set the AM depth to 60%.
3. Press
AM On Off softkey.
AM toggles from
Off to On. The
indicates “On” signifying that you have
enabled amplitude modulation.
Preset
Frequency
Amplitude
AM
To Next Page
Loading...
Need help?
General
