Agilent Technologies XGS-600 - BA Cross Reference

XGS-600 Gauge Controller
DRAFT 4/15/14
21
BA Cross Reference
The XGS-600 controller is compatible with many competitor gauges. Table 2-3 list which
Agilent gauge setting to use for each of gauges. See “Sensor Setup Screen” on page 31.
Table 2-3 BA Cross Reference
GP ETI MDC Huntington Kurt Lesker Duniway
Select Sensor model 572 for the following:
274012 4336-TP/1 TP-100 G100TF T-075-N
274013 4336-TP TK-100 G075TK T-075-P
274015 4336-TK TK-100-F T-075-K
274016 4336-TK/1 T-100-N
274017 T-100-K
274018 T-100-P
274021 T-CFF-133
T-CFF-275
T-KF25
T-KF40
Select Sensor model 571 for the following:
274002 4336-P IGT-075 IP-100 G075F I-075-N
274003 4336-K IGT-100 IK-100 G100F I-075-P
274005 4336-F IK-100-F G100KQF25 I-075-K
274006 4336-P/1 IP-150 G100KQF40 I-100-N
274008 4336-F/1 IK-150 G075N I-100-K
274020 4336-K/1 IK-150-F G100K I-100-P
274032 8140 I-CFF-133
274028 I-CFF-275
274043 I-KF25
I-KF40
Select Sensor model UHV24 for the following:
274022 8130 UHTT IGT-T G8130 T-NUDE-F
274023 8130T UHIR IGT-TI G8130T I-NUDE-F
274041 BATT
274042 BAIR
Select Sensor model 563 for the following:
G8140 I-075-NC
G8120 I-075-KC