Agria 900 - Page 32

32 Power Hoe 900 / 900-S
5. Maintenance
Air flap closed
5
Governor
For smooth engine performance keep
governor linkages, springs and actuat-
ing devices clean and free from dust and
dirt. Do not bend or twist parts. (Gover-
nor linkages on carburetor A/6).
Removing Carbon Deposits
After every 100 hours of operation take
off the cylinder head and remove car-
bon deposits on the cylinder, cylinder
head, piston crown, and valves and re-
new head gasket.
è - Serviceç
Safety circuit Function
Check safety circuit function for proper
function each time you take up opera-
tion and you do maintenance work on
the machine.
Type 900:
l Upon release of the lever (A/15) the
engine must automatically come to a
stop.
Type 900-S:
l Upon release of the lever (A/15) and
when the clutch is engaged the engine
must automatically come to a stop.
l Check electric lines and connections
for good condition and exchange them,
if necessary.è - Serviceç
Speed Control
Devices for actuating engine speed must
be adjusted correctly to start, operate
and shut off the engine at correct speed
rates.
ll
ll
l Function Check
Remove the air filter (see page 30). Set
the speed control (A/1) to CHOKE. The
air flap on the carburetor must be closed.
è - Serviceç
Carburetor Settings
Small differences in fuel, temperature,
height or strain may require slight ad-
justment of the carburetor. Only let en-
gine run with air filter and air filter cap
fitted.
è - Serviceç