26 Power Hoe 900 / 900-S
4. Commissioning and Operation
4
Shutting off the engine
Move speed control lever to NEUTRAL and let the
engine run idling for about half a minute.
Move speed control lever completely to the STOP
position.
Withdraw spark plug connector - protection against
unauthorised use!
W
To shut off the engine, do not move the lever
to CHOKE position – danger of fire!
I
The speed control lever also serves as engine
shut-off lever. When necessary, move the
speed control lever to STOP to stop the engine.
W
Have the engine cooled down before parking
the power hoe in closed rooms.
Hoeing
W
Check safety circuit function - Only operate
the machine if the safety circuit is working!
Wear individual protective ear plugs and solid shoes.
Before you start working, remove all hard objects from
the area to be cultivated. While working, watch out for
hard objects.
Before moving off, check the immediate surround-
ings, e.g. for children.
Type 0900
Start the engine
l
The hoeing tools start rotating once the speed
control lever is moved to position “max.”.
I
Note: Only operate the hoe at high engine speed
(speed control lever is in position “max.”). Do not
hoe at “half throttle” because the centrifugal clutch will
slip and the clutch linings will wear off fast.
To adjust the desired working depth, set the depth bar to
one of the four depth settings.
24
22
630 sec
To Next Page
Loading...
