Power Hoe 900 / 900-S 37
6. Troubleshooting
6
Problem Possible cause Possible solution Page
Engine does - Speed control linkages are Clean speed control 32
not run clogged or jammed linkages
smoothly
Engine - Speed and engine stop are not Readjust speed control
does not stop properly adjusted
¬
32
when set
to stop
Engine - Loose cylinder head or Tighten cylinder head,
¬
output too low damaged gasket exchange gasket
- Poor compression Have engine checked
¬
- Air filter clogged Clean the air filter 30
Type 900:
Hoeing shaft - Speed control lever not Adjust speed control lever
¬
32
does not come properly adjusted
to a stop in po- - Idling speed not properly adjusted Adjust idling speed
¬
32
sition NEUTRAL
Type 900-S:
Clutch does -Hand clutch lever misadjusted Adjust clutch free play 33
not decouple
Clutch slips - Hand clutch lever misadjusted Adjust clutch free play 33
- Worn out clutch Exchange clutch cone
¬
Excessive - Loosened attachment bolts Tighten attachment bolts 33
vibration
¬
= For this purpose contact your agria workshop.
To Next Page
Loading...
