AGS D-PL - Technical Data; Declaration of Conformity

TR10K001-A RE / 04.2009
63
Technical data15
Mains voltage 230/240 V, 50/60 Hz
Stand-by approx. 6 W
Mains voltage type Y
Protection category Only for dry rooms
Automatic safety cut-out Is automatically taught in for
both directions separately.
Travel limit safety
cut-out/
force limit
Self-learning•
Wear-free, as it is •
designed without
mechanical switches
Additionally integrated •
travel time limit of
approx. 45 s
Readjusting automatic •
safety cut-out for every
door run.
Pull and push force Max. 500 N
Motor Direct current motor with hall
sensor
Transformer With thermal protection
Connection technology Simple screw terminal,•
Max. 1.5 mm•
2
For internal and external •
buttons with impulse
operation
Special functions Operator light, 2-minute •
light
2-wire photocell can be •
attached
Quick release Actuated from inside with pull
cord in the event of a power
failure
Remote control With 2-button hand
transmitter RSE2
(433.92 MHz) and integral
radio receiver with 6 memory
spaces
Door travel speed Approx. 10.5 cm per second
(dependent on door size and
weight)
Airborne sound
emission of the garage
door operator
The equivalent continuous
sound pressure level of 70 dB
(A-weighted) is not exceeded
at a distance of three metres.
Operator boom Two-part•
With maintenance-free, •
patented toothed belt
Declaration of Conformity16
(as defined in the EC Construction Products Directive 89/106/
EEC)
Manufacturer: AGS
Postfach 14 01 09
D-33621 Bielefeld
The Product Type:
Sectional garage door
The sectional garage door has been developed, designed and
manufactured in conformity with the EC Construction
Products Directive 89/106/EEC.
Applied and consulted standards:
EN 13241-1: 2003 Doors – Product Standard – Products
Without Fire-Proof and Smoke-Tight Properties
Putting the door into operation is prohibited until it has been
established that the door has been installed in accordance
with our specifications and its function has been properly
tested. Any modification made to this product without our
express permission and approval shall render this declaration
null and void.
Bielefeld, Germany, 01.02.2009
ppa. Uwe Brandt
Managing Director
ENGLISH