8
TR10K001-A RE / 04.2009
Dear Customer,
We are delighted that you have chosen a quality product from
our company.
About These Instructions1
Read through all of the instructions carefully, as they contain
important information about the product. Pay attention to and
follow the instructions provided, particularly the safety
instructions and warnings.
Be sure to keep this manual in a safe place.
Warnings used1.1
ATTENTION
Indicates a danger that can lead to damage or destruction
of the product.
The general warning symbol indicates a danger
that can lead to injury or death. In the text
section, the general warning symbol will be used
in connection with the caution levels described
below. In the illustrated section, an additional instruction
refers back to the explanation in the text.
CAUTION
Indicates a danger that can lead to minor or moderate
injuries.
WARNING
Indicates a danger that can lead to death or serious injuries.
DANGER
Indicates a danger that leads directly to death or serious
injuries.
Definitions used1.2
DIL switches
Switches located under the side flap of the operator cover for
activating the operator functions.
Impulse control
With each push of the button, the door is started against the
previous direction of travel, or the motion of the door is
stopped.
Learning runs
Door travels in which the travel and the forces needed for
moving the door are taught in.
Photocell
The photocell is a safety device. If the photocell is activated
while the door is moving towards the CLOSE end-of-travel
position, the door will stop and move in the opposite direction.
Normal mode
Gate movement with the taught in travel distances and forces.
Reference run
Door cycle towards the OPEN end-of-travel position in order
to set the home position.
Reverse cycle/safety cycle
Door travel in the opposite direction when the safety device or
power limit is activated.
1 About These Instructions ....................................... 8
2
Safety Instructions......................................... 9
3 Fitting ..................................................................... 10
......................................................................20
4 Initial Start-Up ....................................................... 37
5 Operator ................................................................. 45
6 Hand transmitter RSE2 ......................................... 45
7 Integral radio receiver .......................................... 45
8 Operation ............................................................... 46
9 Inspection and Maintenance ............................... 47
10 Operator light messages ...................................... 47
11 Malfunctions and Troubleshooting ...................... 47
12 Dismantling............................................................ 59
13 Cleaning and Care ................................................ 62
14 Warranty Conditions ............................................. 62
15 Technical data ....................................................... 63
16 Declaration of Conformity .................................... 63
A Tools needed for assembly .................................... 2
B Garage door article supplied ................................. 3
C Garage door operator article supplied ............... 27
D Accessories for the garage door
operator ................................................................. 68
E Garage door replacement parts .......................... 69
F Garage door operator replacement parts .......... 70
G Drill stencil ............................................................. 71
Dissemination as well as duplication of this document and the
use and communication of its content are prohibited unless
explicitly permitted. Noncompliance will result in damage
compensation obligations. All rights reserved in the event of
patent, utility model or design model registration. Subject to
changes.
Contents
ENGLISH
To Next Page
Loading...