AIC Auriga - Page 14

5
Chapter 2. Hardware SetupAuriga User Manual
Step 2 Lift the carrier frame by the blue metal tab and remove the protective cover
as demonstrated in gure 3 and gure 4.
Step 3 Insert the CPU package into the carrier frame as demonstrated in gure 5.
Step 4 Remove the Pick and Place(PnP) cap by lifting the it upward as demonstrated
in gure 6.
Front
Front
Front
Front
Figure 3 Lift carrier frame Figure 4 Remove protective cover
Figure 5 Insert package
Figure 6 Lift PnP cap