What to do if my Aidacare Medical Equipment bed does not move up or down?
If your Aidacare Medical Equipment bed isn't moving up or down, there are a few potential reasons. First, ensure the bed is properly plugged into a power source and allow approximately 3 hours for the battery to charge if your bed has one. If that doesn't solve the issue, the actuator, handset, or NCP might be faulty. Try swapping them to identify the problem component.
Why does my aidacare FL250 Medical Equipment bed not stay in place?
If your Aidacare Medical Equipment bed isn't staying in place, it could be due to the braking system. Ensure the brake pedal is fully engaged in the lowest position to activate the Total Brake. If the issue persists, the brake system may be malfunctioning.
What to do if the backrest of my Aidacare Medical Equipment does not move up or down?
If the backrest on your Aidacare Medical Equipment isn't moving, start by checking the actuator code; if it's loose, fully plug the cables into the control box. If it still doesn't work, try swapping the Actuator, Handsets or NCP.
Specifies the intended patient population and supervision requirements for the bed.
Lists the main functional and design aspects of the FL250 Floorline Bed.
Outlines general safety considerations for operating the bed and its components.
Explains how to operate the bed functions using the handset.
Details the functions and buttons available on the Attendant Control Panel.
Instructions for connecting the handset to the bed.
Steps to reset the bed's electronic system after power loss or changes.
Provides step-by-step instructions for assembling the FL250 Bed from its packaging.
Guides on fitting the adjustable mattress retainer at the foot end.
Instructions for mounting the brackets for head and foot boards.
Steps to safely unpack the bed from its shipping carton.
Instructions for attaching the wall buffer to protect the bed and wall.
Guidance on placing the bed in its desired location.
Assembly steps for the bed when no immediate power source is available.
Guides on how to securely attach the head and foot boards to the bed frame.
Instructions for fitting the side panels to the bed platform sections.
Details the assembly of the Self Help Pole and IV Pole attachments.
Steps to convert a single bed to a king single size using the conversion kit.
Instructions for installing the FL250 Folding Assist Bar for user support.
Guides on assembling and fitting the split folding side rails for safety.
Steps to install the battery backup unit for power outage protection.
Instructions for assembling the EasyMove Transport System for bed mobility.
Prepares the bed for attachment to the EasyMove transport system.
Secures the bed onto the EasyMove transport system trolleys.
Attaches head and foot boards to the bed while on the transport system.
Details the procedure for lifting and lowering the bed legs.
Explains how to pivot the bed frame vertically on the transport system.
Guides on safely maneuvering the bed using the EasyMove transport system.
Details the installation process for the USB Port Upgrade Kit.
Explains the operation of central and directional locking castors and brake engagement.
Details the process for disengaging brakes and moving the bed when at its lowest position.
Instructions on how to extend the bed platform for added length.
Steps for preparing the bed for cleaning or moving, including safety checks.
Covers general inspection points for the bed's structure and components.
Details checks and adjustments for the bed's braking system.
Guidance on checking the battery indicator for the backup power supply.
Outlines Aidacare's warranty policy and consumer rights.
General| Brand | aidacare |
|---|---|
| Model | FL250 |
| Category | Medical Equipment |
| Language | English |
To Next Page