CHAPTER 7
36 37
SOLO 2 DL
7.1.8 Connected device visualization issues
It may occur that using Race Studio 3 on an iMac with virtualized Windows the device
connected via Wi-Fi takes some time to be shown in the network or is not shown at
all. This is why we always suggests using an Wi-Fi (WLAN) router.
This router work as an Access Point allowing more external devices to connect to its
network. Solo 2 DL Wi-Fi configuration is to be set on Existing Network as explained
before.
7.2 Configuration of Solo 2 DL
Once Solo 2 DL connected to the PC
n
click “Configurations” icon and configurations page appears
n
click “New” and new configuration panel appears: select “Solo 2-DL” and press “OK”.
To Next Page
Loading...