AIPAS AIPAS-C1 - Page 8

Setting Up Your Aipas eBike Setting Up Your Aipas eBike
12 13
Install displayInstall front wheel
1
Loosen the screws to
remove the front fork
sleeve.
2
Take out the stem and
insert it into the front
frame.
3
Tighten the screws to fix
the stem in place.
6
Cover the stem screw
with Steam screw plugs
for protection.
4
After making sure the
stem is align with the
direction of the tire, Tight-
en the clamping screws
below the stem to fix the
direction.
5
Tighten the screws to fix
the handlebar in place.
1
Take out the kickstand and loosen the
two screws on top.
2
Make sure the kickstand is align with the
two holes in the frame.
3
Tighten the screws to fix the kickstand in
place.