Aiphone IS SERIES Manual

Step 8: Registering Stations
D. Click
Port number auto-setting
to assign all stations the required ports to all stations that need to communicate
(see Figure 7.3).
E. Click
Temporarily stored
to save changes.
Figure 7.3: Port Number Auto-setting
Figure 8.1: Registering Stations
A. Select Registering stations from the menu on left.
B. The Registering stations table will be populated based on the settings made in Step 7. Enter a Station number and
Station name for each door/master unit (see Figure 8.1).
C. Click
Temporarily stored
to save changes.
6 | IS Series IP Direct System Programming Guide
Figure 7.1: IP Unit Registration - IP Unit Search Figure 7.2: Manual Entry
Step 7: IP Unit Registration - Host
A. Select IP unit registration from the menu on left.
B. Scroll down and click
IP unit search
in the lower right (see Figure 7.1).
C. Check the station(s) needing to be added to the Imported IP units list. Click
Add to the imported IP units list
to add them. Any units not appearing can be manually entered (see Figure 7.2).

Aiphone IS SERIES Specifications

General

Brand	Aiphone
Model	IS SERIES
Category	Intercom System
Language	English