Aiphone IX-EA - Page 57

57
Settings and Adjustments
Station programming
4
*1 Indicates a required field. Use the default values, unless a change is necessary.
Ringback Tone Select the sound to be played by the station
when placing a call.
• None
• Call Pattern 1
• Call Pattern 2
• Call Pattern 3
• Call Pattern 4
• Call Pattern 5
• Call Pattern 6
• Call Pattern 7 (for IX-EA)
• Tremolo Sound
• Busy Response Tone
• On Hold
• Operation Sound
• Error
• Pre Tone 1
• Pre Tone 2
• Pre Tone 3
• Communication End
Pretone
• Call Queue Notification
• Waiting Reply Tone
• Select a sound that is
registered in
“Custom
Sound Registry
(→page 54)”.
Call Button: Call
Pattern 1
Option Input 1: Call
Pattern 2
Option Input 2: Call
Pattern 3
Option Input 3: Call
Pattern 4
Option Input 4: Call
Pattern 5
Option Input 5: Call
Pattern 6
Option Input 6:
Tremolo Sound
Call Timeout
*1
Set the Call Timeout for outgoing call. • 10 - 600 sec: Select to set
between 10-600 sec (by 1
sec).
• Infinite: Keep calling until
call is answered.
60sec
Ringback Tone Count
[time(s)]
Set the play count of ringback tone for
outgoing call.
• 1-20 times
• Infinite: The ringback tone
will continue for the amount
of time configured in "Call
Timeout."
Infinite
Note
• When calling a VoIP Phone, this will be the shorter time of the time set for "Call Timeout" and the call duration set on the IP-
PBX.
Entry Description Settings Default values