67
Settings and Adjustments
Station programming
4
■ Option Relay Control Authentication Key
Entry Description Settings Default values
Option Relay Control
Authentication Key
If "Option Relay Control (administrator
setting)" is set to "Enable," and "Speed Dials
/ Favorites" - "TLS" is set to "Enable" on the
requesting station, configure the key used to
decrypt encrypted communication.
If this matches the "Option Relay Control
Key" of the station that performs the
operation, the Relay Output may be
controlled.
1 - 20 digits -
Note
• A single optional relay authentication key can be configured for a station. It will be shared among multiple output terminals.
• The "Option Relay Control Authentication Key" is displayed as "●●●●●" in the Settings screen.
To Next Page
Loading...
