69
Settings and Adjustments
Station programming
4
Email
Configure the email function (function that sends information of the operation of the Door Station to the  pre-registered 
email address.).
■ Email Addresses
■ Email Event Trigger
Set up which event triggers will send an email message for each address. 
Important
• If an SMTP server is not configured, email will not be sent even if email is configured. If email is not sent, contact the system 
administrator.
Entry Description Settings Default values
Destination 1 - 
Destination 3
Set the destination email address. Define up 
to three addresses.
1 - 64 alphanumeric 
characters
-
Entry Description Settings Default values
Outgoing Normal Call Send email when an outgoing call is placed 
at "Normal" priority.
• Checked: Send
• Unchecked: Do not send
Unchecked: Do not 
send
Incoming Normal Call Send email when an incoming call is 
received at "Normal" priority.
• Checked: Send
• Unchecked: Do not send
Unchecked: Do not 
send
Outgoing Priority Call Send email when an outgoing call is placed 
at "Priority" priority.
• Checked: Send
• Unchecked: Do not send
Unchecked: Do not 
send
Incoming Priority Call Send email when an incoming call is 
received at "Priority" priority.
• Checked: Send
• Unchecked: Do not send
Unchecked: Do not 
send