70
Settings and Adjustments
Station programming
4
Outgoing Urgent Call Send email when an outgoing call is placed
at "Urgent" priority.
• Checked: Send
• Unchecked: Do not send
Unchecked: Do not
send
Incoming Urgent Call Send email when an incoming call is
received at "Urgent" priority.
• Checked: Send
• Unchecked: Do not send
Unchecked: Do not
send
Call Failed Send email when outgoing call has failed. • Checked: Send
• Unchecked: Do not send
Unchecked: Do not
send
Latch Reset Send email when reset latch relay output.
("Latch Output" is selected in "Relay Output"
- "Function (administrator setting)".)
• Checked: Send
• Unchecked: Do not send
Unchecked: Do not
send
Error Send email when a communication error
has occurred.
• Checked: Send
• Unchecked: Do not send
Unchecked: Do not
send
Station Restarted Send email when the station has reset. • Checked: Send
• Unchecked: Do not send
Unchecked: Do not
send
SD Card Error (except
IX-SS-2G)
Send email when a microSD access error is
detected. If the error is detected
continuously, mail will not be sent an
additional time.
• Checked: Send
• Unchecked: Do not send
Unchecked: Do not
send
Recording Memory
Full (except IX-SS-2G)
Send email when a microSD card meets
following criteria. If the error is detected
continuously, mail will not be sent an
additional time.
• When
“Prevent Overwrite (→page 73)” is
set to "ON"
– Recorded recordings exceeds 950
– Storage capacity remaining 5%
• When
“Prevent Overwrite (→page 73)” is
set to "OFF"
– Recorded recordings exceeds 999
– Storage capacity remaining 0%
• Checked: Send
• Unchecked: Do not send
Unchecked: Do not
send
Entry Description Settings Default values
Subject Set the Subject of email per Event Trigger.
This will be used for all destinations.
1 - 64 alphanumeric
characters
-
Entry Description Settings Default values