86
Settings and Adjustments
Station programming
4
Communication
*1 Indicates a required field. Use the default values, unless a change is necessary.
Entry Description Settings Default values
Talk Timeout [sec]
*1
Set the communication timer when placing a
call. Communication timer when receiving a
call is set at the destination station.
• 30-600 sec: Choose this to
set a time between 30 and
600 sec (by 1 sec).
• Infinite: No timeout.
60sec
Communication Start
Tone
Select the tone to be played when
communication starts.
• None
• Call Pattern 1
• Call Pattern 2
• Call Pattern 3
• Call Pattern 4
• Call Pattern 5
• Call Pattern 6
• Call Pattern 7 (for IX-EA)
• Tremolo Sound
• Busy Response Tone
• On Hold
• Operation Sound
• Error
• Pre Tone 1
• Pre Tone 2
• Pre Tone 3
• Communication End
Pretone
• Call Queue Notification
• Waiting Reply Tone
• Select a sound that is
registered in
“Custom
Sound Registry
(→page 54)”.
None
Important
• When on a call with a VoIP Phone, this will be the call duration configured on the VoIP Phone.
To Next Page
Loading...
