74
How to use the device
Possible operations when making calls, during calls,
during pages, and during monitoring
3
Video/Audio Recording
Video/audio can be recorded from the camera when receiving an incoming call, during a call, and during monitoring. If
there is no image from the camera, only audio will be recorded.
Depending on the configuration, may not be displayed on the screen. In this case, this function cannot be used.
*A separately sold microSD card is required for video/audio recording. (→page 26)
1. Tap on the screen.
• The icon changes to and video/audio
recording starts.
2. Tap to end video/audio
recording.
• The icon changes to and video/audio
recording ends.
Note
• When the incoming call, call, or monitoring is ended, video/
audio recording also stops automatically.
• If overwriting is enabled, the oldest data is overwritten with
the newest data if the card becomes full.
• The camera image displayed on the monitor will be
recorded. However, If images from both a Video Door
Station and a network camera are displayed on the LCD
display simultaneously, only the image from the camera
selected in the configuration will be recorded.
• During scan monitoring, video/audio can be recorded only
when switching is stopped.
• Depending on the configuration, video/audio recording will
start automatically.
• Depending on the configuration, a single video/audio
recording may be split into multiple files.
• Video/audio recording may stop automatically, depending
on the configuration.
• will not be displayed in the following states.
– The manual video/audio recording function is not
permitted, and no auto video/audio recording start trigger
is configured
– A microSD card is not inserted
– There is no free space on the microSD card for video/
audio recording
• The network camera may not be able to record video,
depending on the size of the video.
To Next Page
Loading...
