85
How to use the device
Checking the System
3
Confirming Station Information
The firmware version and network configuration information can be checked for this station.
1. Tap [Status] on the Home screen.
2. Tap [Station Information].
• FIRMWARE VERSION: This shows the
firmware version of this station.
• NETWORK STATUS: This shows whether this
station is connected properly to the network.
• IP-PBX STATUS: This shows the connection
status with the IP-PBX.
• CONTACT INFORMATION: This shows
information on the installer configured in the IX
Support Tool configuration tool.
3. Tap [Network Information].
4. Enter the administrator password,
and then tap [ENTER].
This password is the same as the administrator
password for Web configuration. Contact your
system administrator for details.
õ
õ
To Next Page
Loading...
