Aiphone IX SERIES - Getting Started

8 | IX Series Quick Start Programming Guide
Adding a New Station
Click
Add New Station
.
Add New Station
Step 2: Adding a New Station
Multiple stations and station types can be added on the Add New Station screen.
Use the Station Type drop-down menu to
select the Station Type of the new station.
Station Type
Enter the quantities of stations that are
being added to the system.
Station Quantities
Add the station(s)
Click
Add
to add the station(s) to the
Station Information table below.
Getting Started
Step 1: Opening the System Conguration Settings
From the top menu bar, click Tools(T) and select System Conguration.
Adding a new station to an existing system requires having the system conguration le open in Support Tool and a network
connection to all existing stations. The new station should be connected to the network and completed its initial boot up
process before starting step one.
Finished
Click
OK
once all stations of each
Station Type has been added.
Refer to page 4 and continue through page 7 to complete the steps for editing the station
information, association, and uploading the setting les.
Note: