15
Before Using
User Interface
2
Communication Screen
The following screen is displayed during communication with the other party.
*1 This may not be displayed depending on the settings.
No. Description
1 Indicates the priority level of the communication. (Green: Normal, Yellow: Priority, Red: Urgent).
If several operations are performed at the same time, the operation with the highest priority will take priority.
2
Information about the destination station is shown.
*1
3 Indicates in communication.
4 Indicates the door release status.
This will turn white for approximately 3 seconds when the destination station is used to unlock the door release.
5 Tap to adjust the receive volume.
“Adjusting speaker volume (→page 27)”
6 Tap to end communication.
7
Hearing aid (T mode compatible symbol)
*1
Creates a hearing loop to make it easier to hear audio for hearing aids with T mode.
7
1
2
3
4
5
6
To Next Page
Loading...
