19
How to use
Placing a call
3
Calling using the Direct Call List
The Direct Call List can be used to call a tenant by selecting the resident's name or the Unit Number.
Depending on the configuration, the person to visit may not be displayed in the list.
Depending on the settings of this station, may not be displayed. In this case, it cannot be used.
Refer to
“Displaying Operation Screens (→page 16)” for information on how to display operation screens.
1. Tap the person to visit.
• The ringback tone or audio guidance will be
played.
2. Speak with the other party.
• The audio guidance may be played.
3. Tap to end
communication.
Display the previous
page
Display the next page
To Next Page
Loading...
