Aiphone IXW-MA - Upload Settings

10 | IXG Commercial Quick Start Programming Guide
Upload Settings
Once associated, each station will need to have its setting le uploaded to it. This setting le contains
all other system information and is required for the station to function. To upload the settings to
each station, select Connection on the top menu and select Upload Settings. Select each station
by placing a check mark next to it, or click
Select
to select all stations at once. Click
Settings
to upload
station settings. If Sounds, Images, or Schedules were also congured, click their respective buttons.
Once the Upload is complete, select File from the top menu and click Export System Conguration. Export this
system's conguration to save as a backup if the settings are lost, or if they need to be moved to a new PC and
Support Tool. If the conguration le is going to be emailed, it will need to be compressed rst.
Exporting System Conguration
Mobile App Integration
Create a New Administrator Account
If IXG mobile apps are to be part of the system, the rst step in many situations is to create an
administrative account for the site.
However, if this is one of multiple sites the installing company is responsible for, skip the "Create a New
Administrator Account" step. Use existing IXG cloud server account credentials in the step "Upload Settings to
IXG Cloud Server" to add this site to the installation company IXG Cloud Server account.
A verication code will be sent to the registered email. To enter this verication code, select App Integration from
the top menu and click Activate. Enter the previously created Administrator ID and Verication Code and click
Activate
.
Select App Integration from the top menu and click Create a New Administrator ID. Enter an ID, Password, and Email Address.
Click
Create
to continue.
If any stations fail, they may still
be booting up from the Association
Settings step. It is also important
to ensure that the programming
PC is in the same subnet range
as the stations. For example, if the
stations are set to 192.168.1.xx,
the PC should also be set to this.