Aiphone IXW-MA - Configuring the system

7
Station Information
From the side menu, navigate to Station Information, Identication. This menu can be used to customize the
Station Number and Name for each station in the system. The Station Name and Number are typically only seen
by stations within the same Unit for internal communication, but it is recommended to give custom names to any
door stations so that users can distinguish them more easily. Once everything is congured, click
Save
.
Identication
From the side menu, navigate to Station Information, ID / Password. This menu can be used to edit the the
Admin ID and Password for each station, though this is not normally recommended. This menu can also be used
to give stations an ONVIF and RTSP ID and password, which is needed for door stations that will be tied to an
NVR.
ID / Password (Optional)
Gateway Settings
To add the gateway adaptor to the system, navigate to Gateway Settings, Gateway Registration. For each
gateway adpator, select Enable, then optionally edit its Station Name, and review the other settings. Up to 99
gateway adaptors can be used per system. Once everything is congured, click
Save
.
If the system contains mobile apps, a gateway adaptor (IXGW-[T]GW) will need to be added and congured.
Gateway Registration
Navigate to Gateway Settings, Gateway Selection. For each unit, choose a primary gateway that will be used
to call IXG mobile apps. An optional secondary gateway can also be designated that will be utilized if the primary
gateway goes o󰀪ine. Click
Save
.
Gateway Selection
Gateway Selection cannot be
completed until the gateway and
stations receive their network
information. See page X.