5
Site Settings (continued)
Units/Stations - Adding Units (continued)
From left to right, select the Building Number the unit will belong to (in this case, 01), set a Unit Number, and click
Select
to choose a unit Type.
When adding multiple of
the same Unit Type, select
a completed Unit Number
eld and press the Enter key
on the keyboard. This will
auto-populate the next eld.
Click
Save
once every unit has been created and all stations have been added.
Once all of the previous changes have been updated, nd the Default Call Settings section at the top of the
screen. Click on
Group
to automatically congure a default paging group for all master stations. Click on
Called Stations (Door/Sub Stations)
to set up default calling assignments for door stations.
Clicking
Called Stations (Door/Sub Stations)
will automatically set up calling assignments for any
door stations in the system. To set these up manually,
or customize settings beyond the defaults, refer to
the Call Partitioning section found on page 14.
Once all units have been added, enter a Unit Name for each. For each station to be added to a unit, click
Select
next to the appropriate station in that unit and choose a station type from the list. Use the drop-down menu to
select how many mobile apps are permitted for each unit, if needed.
To Next Page
Loading...
